PESA, a leading U.S.-based custom design and build manufacturing company for professional audio and video signal distribution <http://www.pesa.com> , will present its Jaguar 3 64×64 series fiber optic routing switcher with an optional backplane design that uses MiniCube™ Miniature Form Pluggable (MFP) transmitter technology at InfoComm 2012 (Booth N1327), which runs June 13-15 in Las Vegas, Nev. Developed by Advanced Fiber Products, LLC., MFP technology establishes a new approach to LC-type fiber connectivity that saves space and uses less power.
Offering up to 64×64 high-speed fiber optic ports, PESA’s Jaguar 3 is the first routing switcher <http://www.pesa.com/index.php?option=com_content&view=article&id=358&Itemid=74 <http://www.pesa.com/index.php?option=com_content&view=article&id=358&Itemid=74> <http://www.pesa.com/index.php?option=com_content&view=article&id=358&Itemid=74 > > to incorporate MFP technology for compact fiber optic switching. Two shared backplanes allow I/O ports in groups of 32 for either 75 Ohm BNC or MFP LC fiber. The Jaguar 3 can route all SMPTE and ITU standard serial digital video signals, and it supports embedded audio and other ancillary data for SDI, HD-SDI, and DVB/ASI broadcast sources. For digital cinema, the Jaguar 3 can easily be configured to support SMPTE S372 for dual-link HD-SDI.
With the MFP optional fiber backplane, HD signals can be transmitted up to 10 Km. Data rates from 50 Mbps up to 3 Gbps are supported. All inputs are auto-equalized, while outputs are auto-sensed and re-clocked to the appropriate transport stream. For non-standard formats, re-clockers can be bypassed to allow any data rate up to 3 Gbps. Two independent reference inputs allow easy selection of sync using either black burst or tri-level sync source.
“Although 3G-SDI fiber optic switching has been around for years, MFP technology brings a whole new concept to frame packaging,” explained Dan Holland, PESA vice president of product marketing. “With PESA’s new Jaguar 3 64×64 MFP fiber matrix switcher option, offering coax and/or fiber connectivity becomes much less complex, which allows us to provide a better performing matrix at a much more competitive price point.”
With MFP modules, both vertical and right-angle pluggable cages are available, resulting in a 50 percent smaller footprint. With vertical mount cages, hot-pluggable fiber connections can be loaded in the same backplane space as a standard BNC port, which simplifies product packaging and increases product performance. Plus, MFP video transceivers use up to 40 percent less power than traditional video optical transceivers.
The 2 RU Jaguar 3 frame features front load, hot-swappable card sets and includes slots for optional redundant power supply/control modules. It can be configured to support a variety of control interfaces, including Ethernet, RS-232, or PESA’s PERC2000 control system. It also includes PESA’s CATTRAX software, which provides a network interface for diagnostics, setup, and switching by multiple users. For pushbutton control, the Jaguar 3 offers three styles of local or remote panels.
